Contact Us
NATIONAL SALES HOTLINE：13585011595
0510-85503992
0510-85503992
Tel：0510-85503992
Fax：0510-85503992
Sales hotline：13585011595
Contacts：Zhou jian xing
E-mail： [email protected]
[email protected]
Add：Qinxin industrial Fields,Binhu Dist,Wuxi City,Jiang su
For the anticorrosive tank, the selection of anticorrosive coating is also an important work, because it will affect the anticorrosive quality and effect of the tank, so we can't be careless. Moreover, if the right anticorrosive coating is selected, it is also advantageous for the use of anticorrosive tank.
Part I: inner surface of anticorrosive tank
In the past, carbon based electrostatic conductive coating was generally used. However, it was found in the process of use that after a long time, it will still rust and corrode. Therefore, the anti-corrosion effect is not very good, especially after a long time of use. Now, it is to use non-carbon system conductive electrostatic anticorrosive coating, because it can solve this problem, and has very good anticorrosive effect.
Part II: external surface of anti-corrosion storage tank
Generally, it adopts external anticorrosive paint, such as chlorinated rubber paint, and common polyurethane paint. However, in high temperature environment, there may be problems and some unsafe factors. Therefore, considering all kinds of factors, it is more appropriate to use heat insulation reflective coating, which can play a role in heat insulation and temperature reduction, so as to avoid the above problems.
Part III: external surface of anti-corrosion tank bottom plate
Generally, asphalt or epoxy coal tar coating is used. However, from the perspective of application, the effect is still lacking. Therefore, the water-based lithium silicate zinc rich coating is recommended for comprehensive comparison. This kind of coating has the advantages of simple construction and good environmental protection, so in some aspects, it has a very good anti-corrosion effect.
The above three parts are very important in the tank, so the selection of anti-corrosion coating cannot be wrong, so as to avoid affecting the application of anti-corrosion tank. Moreover, the detailed description and guidance of them is also conducive to our correct choice, and further, we can obtain good anti-corrosion effect, so that the service life of the tank can be long.
Previous page：返回列表
