Contact Us
NATIONAL SALES HOTLINE：13585011595
0510-85503992
0510-85503992
Tel：0510-85503992
Fax：0510-85503992
Sales hotline：13585011595
Contacts：Zhou jian xing
E-mail： 13585011595@163.com
sales@sencanjixie.com
Add：Qinxin industrial Fields,Binhu Dist,Wuxi City,Jiang su
I believe that we will not be unfamiliar with the anticorrosive tank, and we have a certain degree of knowledge and understanding, through the previous relevant articles, as well as serious learning. Therefore, based on this, the following will continue to carry out its understanding and understanding, so that we can further familiarize ourselves with this kind of tank through this article.
1. What are the instructions for anticorrosion construction of anticorrosive storage tank that we must know and master?
We should know and master the anti-corrosion construction of anti-corrosion storage tank. In addition to the existing ones, there are also the following, which are:
The internal and external anti-corrosion construction of anti-corrosion storage tank is not carried out after the tank pressure test, but also after sand blasting and overall coating. In the process of tank construction, it will also be carried out. Therefore, the general steps and processes are as follows: shot blasting treatment of materials - coating part of coating - welding, production, installation, pressure test - reprocessing - coating follow-up paint.
However, it should be noted that some problems may occur during the process, so we should avoid mistakes, so as not to affect the anti-corrosion effect of the tank and the quality of operation.
2. Cleaning of metal surface of anticorrosive tank
The cleaning of the metal surface of the anticorrosive tank is also one of the important links of the anticorrosive work of the tank, because it will affect the adhesion of the anticorrosive coating surface. Therefore, the standard operation should be carried out to avoid all kinds of problems, thus affecting the construction progress, and further affecting the construction effect.
In this process, the specific method is to first carry out surface pretreatment of materials, and then spray primer. After that, after the completion of the tank construction, the surface cleaning of the tank weld bead and the touch up primer are carried out. Then, spray intermediate paint and finish paint on the whole tank, so that the anticorrosive tank has a good anticorrosive effect.
